Kaze Flex 120mm 3-pin RGB 1800 RPM Case Fan € 9.64 (was € 11.39) Save 15% 1 in stock | ||
| More variations available Show | ||
Scythe Kaze Flex 120mm 3-pin RGB 1800 RPM Case Fan
The Kaze Flex fan series combines the award-winning technology of the Kaze Flex fan with an optical revision and RGB LED lighting.
Features
- Quiet PC 3-pin cooling fan
- Closed Fluid Bearings
- Eight RGB LEDs
- 35.8 dB(A) / 1800 RPM / 79.8 CFM
- MTBF 120,000 hours
The Kaze Flex RGB series combines the award-winning technology of the Kaze Flex fans with an optical revision and RGB LEDs. The all-black frame and decouplers emphasise the translucent fan blades illuminated by eight LEDs. A 4-pin 12V RGB connector allows regulation by standard RGB controllers. Thanks to an additional pass-through plug, several fans can be chained together. The outstanding performance of the Kaze Flex range remains untouched. The Sealed Precision FDB bearing ensures a service life of more than 120 000 hours. A regular RGB fan version is also available.
 |  |  |
RGB illumination
Eight RGB LEDs arranged in a ring around the fan motor generate a consistent and powerful illumination of the translucent fan blades. The LEDs are operated by a standard 4-Pin RGB cable that can be directly controlled by the common RGB system of various motherboard manufacturers. Compatible, among others, are systems like ASUS Aurora Sync, ASRock RGB LED, MSI Mystic Light Sync and Gigabyte RGB Fusion.
Sealed Precision FDB
In order to guarantee an exceptionally high level of stability and durability, the fans from the Kaze Flex Series are equipped with a self-contained fluid dynamic bearing (Sealed Precision FDB). The bearing and the spindle are made entirely of high quality compressed metal and lubricated by a special oil film resistant to temperatures of up to 250°C. This drastically reduces friction, ensuring smooth operation and minimised wear, which results in an average life-span of 120,000 hours.
Integrated Anti-Vibration System
The Kaze Flex fan series is equipped with vibration and shock absorbing rubber pads which cover the tunnelless mounting holes. These decouplers effectively eliminate possible vibrations and allow low-noise operation.
Other features
The Kaze Flex 120 RGB comes with a 50 cm long sleeved 3-Pin cable as well as a standard 12V 4-Pin cable for RGB control with an additional pass-through plug. This allows easy installation in almost any system configuration. An adaptor for direct connection to the power supply is also included.
| Specifications | Kama FLEX 1800 3-pin |
|---|---|
| Model | SU1225FD12MR-RH |
| Size | 120x120x25 mm |
| Airflow | 79.8 CFM |
| Noise Level | 35.8 dBA |
| Rotational Speed (±10%) | 1800 RPM |
| Static pressure | 2.4 mm H2O |
| Approximate cable length, cm | 50 |
| Life expectancy @ 25°C continuous use | 120,000 hours |
| Amperage | 0.4 A |
| Amperage LEDs | 0.4 A |
| Connector | 3-pin |
| Power consumption | 5.52 W |
| Bearing type | Closed fluid bearings |
| Mounting hardware included | Screws |
| Accessories | 3 to 4-pin Molex adapter, 4x screws |
| Fan depth | 25 mm |
| Voltage | 12 V |
| RGB | Yes |
| Warranty | 24 months |
| EAN barcode | 0812623021061 |
| Specifications | Kama FLEX 1800 3-pin |
|---|---|
| Model | SU1225FD12MR-RH |
| Size | 120x120x25 mm |
| Airflow | 79.8 CFM |
| Noise Level | 35.8 dBA |
| Rotational Speed (±10%) | 1800 RPM |
| Static pressure | 2.4 mm H2O |
| Approximate cable length, cm | 50 |
| Life expectancy @ 25°C continuous use | 120,000 hours |
| Amperage | 0.4 A |
| Amperage LEDs | 0.4 A |
| Connector | 3-pin |
| Power consumption | 5.52 W |
| Bearing type | Closed fluid bearings |
| Mounting hardware included | Screws |
| Accessories | 3 to 4-pin Molex adapter, 4x screws |
| Fan depth | 25 mm |
| Voltage | 12 V |
| RGB | Yes |
| Warranty | 24 months |
| EAN barcode | 0812623021061 |
Product Resources
FAQ
How do I measure fan size?
The size of fan you need will generally be determined by the size of the fan fitting position in your PC case. The sizes of all the fans on our website are shown as measured along any one of the fan’s four sides, NOT the distance between the fan’s screw holes! Our most popular fan size is 120mm, followed by 80mm. This isn’t really dictated by customer preference, but more by recent designs of PC cases.
As for the thickness (depth) of the fan, generally 25mm (1 inch) is by far the most common depth, although smaller fans can have shallower depths such as 15mm or even 10mm. All our fans are 25mm thick unless otherwise stated. If you have any questions about which fan you should order, please don’t hesitate to get in touch.
If you know the distance between the fan mounting screw holes but don’t know what fan size to order, please see the following table. Note that the mounting hole measurements shown below are taken horizontally or vertically between the holes and not diagonally.
Screw hole spacings and fan sizes
Space Between Screw Holes Fan Size 32mm 40mm 40mm 50mm 50mm 60mm 60mm 70mm 72mm 80mm 83mm 92mm 105mm 120mm I received a small cable (resistor) with my fan; what is it for?
The resistor cable (also called Ultra Low Noise or ULN cable) is designed to allow the fan to run slightly slower for even quieter operation. The benefit in lower running noise is significant. Although the airflow will be reduced slightly, this usually has minimal effect on PC temperature. We would generally recommend using the ULN resistor cable for best results in almost all circumstances.
How can I tell which way the air blows through the fan?
Hold the fan so that the round fan sticker is facing you. You are looking at the rear of the fan. When you plug the fan in, the air will be blowing towards you. If you want a fan to act as an air intake, then the fan sticker will be facing the inside of the case. Some fans also have two small arrows moulded into their plastic housing - one arrow shows the direction of airflow, and the other (at 90°) shows the direction of blade rotation.
Is it possible to use a 4-pin PWM fan or CPU cooler with a motherboard which has only 3-pin fan headers on it?
Electrically, there is no problem doing this - the fourth pin on the fan cable is used purely for PWM control and is not needed in order for the fan to run. So you can plug the 4-pin fan connector onto the 3-pin motherboard fan header, leaving the fourth pin not connected to anything. The fan will potentially run at full speed, so if you would like to reduce the speed of the fan you will need to adjust the fan speed setting in your BIOS or use fan control software such as SpeedFan in Windows.
The only other problem to consider is that occasionally, components immediately adjacent to the motherboard fan header can get in the way of the larger 4-pin fan connector, physically preventing connection. This problem also occurs if you try to use an in-line fan speed controller such as the one made by Gelid.
Another avenue to explore is the possibility of using a bay-mounted fan controller. Several models are available now which provide 4-pin fan headers, so this is an easy way to use 4-pin PWM fans in a PC system which has only 3-pin fan headers on its motherboards. When using this method, you may find it necessary to disable any fan warning settings in your motherboard BIOS, since the motherboard may incorrectly believe that its CPU fan has failed when the fan is connected to a fan controller rather than directly to the motherboard itself.
Top Quiet Fans
Noctua NF-P12 REDUX PWM 12V 1700RPM 120mm Quiet Case Fan
Noctua NF-A12x25 PWM chromax.black.swap 12V 2000RPM 120mm Fan
Noctua NF-R8 REDUX 12V 1200RPM 80mm Quiet Case Fan
Noctua NF-F12 iPPC PWM 12V 2000RPM 120mm High Performance Fan
Noctua NF-F12 iPPC PWM 12V 3000RPM 120mm High Performance Fan
Gelid Silent 6, 60mm Quiet Case Fan
Noctua NF-P12 REDUX PWM 12V 1300RPM 120mm Quiet Case Fan
Noctua NF-A12x25 PWM 12V 2000RPM 120mm Ultimate Quality Quiet Fan
Noctua NF-A6x25 PWM 12V 3000RPM 60x25mm Low Noise Fan
Noctua NF-S12B REDUX 12V 700RPM 120mm Quiet Case Fan
